6404C3 NSK Open Deep Groove Ball Bearing 20mm inside x 72mm outside x 19mm wide Open Design Unit Inch

Design Unit Inch

with axial loads or combined axial and radial loads

Nlim - Grease lubrication limit speed 2500 tr/min

Outside length 2050mm

2-V-150-S 3 jaw extensions (set)

6404C3 NSK Open Deep Groove Ball Bearing 20mm inside x 72mm outside x 19mm wide Open Design Unit InchNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass