6216ZZ NSK Shielded Deep Groove Ball Bearing 80mm inside x 140mm outside x 26mm wide Shields 15 mm Chamfer Dimension Basic

15 mm Chamfer Dimension Basic Load Ratings

Outside length 2299mm / 90

ID When Fitted: min 75

Slide rail length L0: 1500mm

The radial internal clearance is C3 for standard bearing inserts and bearings can be offered with either parallel or spherical outside diameter outer rings with the latter being the type fitted in the bearing unit

6216ZZ NSK Shielded Deep Groove Ball Bearing 80mm inside x 140mm outside x 26mm wide Shields 15 mm Chamfer Dimension BasicNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass