6921 NSK Open Deep Groove Ball Bearing 105mm inside x 145mm outside x 20mm wide Tags gears and sprockets

gears and sprockets

Width B: 120

Axial static load carrying capacity: 365kN

Width 60 mm

D 1 48 mm Shoulder diameter on outer ring wide side face

6921 NSK Open Deep Groove Ball Bearing 105mm inside x 145mm outside x 20mm wide Tags gears and sprocketsNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass